Archive for January, 2010
iPod Click Wheel
Posted by admin January 29, 2010, under iPod Hardware | No Comments
Experiment: How About an Apple?
What can you use to control the touch-sensitive Click Wheel? Here’s an abbreviated list of what we tested:
* Finger: Yes
* Orange: Yes
* Apple: Yes
* Plastic pen cap: No
* Silly Putty: No
* Paper clip: No
* Tip of Cold Heat soldering tool: No
* Prongs from iPod charger: No
The yesses are easily explainable — fruit and flesh can conduct electricity. The no’s, however, are a bit more mysterious. The pen cap and the Silly Putty are not conductors, end of story. But what about the tip of the soldering tool, the paper clip and the charger prongs? Those are conductors! To solve this riddle, we contacted an expert in the electronics field, who recommended the following action: Wrap your finger in aluminum foil and try to work the Scroll Wheel. Our expert was thinking “surface area.” This finger-wrapped-in-foil input worked perfectly.
Can it be that the surface area of the paper clip is not enough to trigger the conductive grid? To investigate this hypothesis, we tried to work the Scroll Wheel using the blunt end of a dinner knife (approx. 0.75 in x 0.5 in). It worked. We concluded that surface area matters.
But there’s another factor, too, because holding the dinner knife between two plastic pens and moving it around the Scroll Wheel doesn’t work. Same with the apple and the orange. You need to be touching the knife or the orange in order for the Scroll Wheel to detect it. The determining factor, then, is you — the human body is a very big conductor, providing a very big neutral area for a charge to jump to. The charge difference between your body and the Click Wheel’s electrodes provides the voltage — or electrical “pressure” — that activates the Click Wheel system.
iPod Hardware
Posted by admin January 29, 2010, under iPod Hardware | No Comments
The Thing About the Battery
iPod’s battery is completely built-in — you can’t just pop in a couple of new AA batteries when it stops charging. This built-in battery has been a headache both for iPod owners and for Apple.
Originally, the iPod battery was not only non-user-replaceable, but it was also very expensive to replace via Apple. When your battery died (sometimes within a year of buying the iPod), you had to send your iPod to Apple for a replacement, and the new battery cost $100. A lot of bad press and a class-action lawsuit later, Apple’s iPod battery-replacement program costs $59. The class-action suit was settled, and iPod owners listed in the suit were compensated with $50 vouchers and partial refunds for their $100 battery replacement.
Apple defends the use of a non-user-replaceable battery by explaining that the built-in battery allows for the ultra-slim form factor for which the iPod is known.
There are ways for you to replace the battery without sending your iPod to Apple.
iPod Features
Posted by admin January 29, 2010, under iPod Features | No Comments
iPod Features
In addition to the iTunes integration and autosync, the Click Wheel (more on this in the hardware section) and the slim form factor, some of iPod’s more notable features include:
Audio
The 160-GB iPod stores up to 40,000 songs (20,000 for the 80-GB model). The search function lets you type in keywords (song name, artist, album) [...]
How the iPod Works
Posted by admin January 29, 2010, under How Does the iPod Work | No Comments
iPod Myths
* If I use iPod as my digital-media player, I can only download music from the iTunes Store.
Not true. You can download music from other sites (as long as the site doesn’t use Windows Media DRM — iPod isn’t compatible with that encoding).
* If I use iPod as my digital-media player, I can only use the iTunes software as my jukebox.
Not true. While iPod is made to work with the iTunes software, there are other jukeboxes out there that you can use with your iPod.
* If I download MP3 or WAV files to my iPod, they’ll be converted into a proprietary audio format.
Not true. Downloading files to an iPod doesn’t change the format. iPod can play MP3, WAV, AAC, AIFF, Apple Lossless and Audible audio files.
iPod Click Wheel
Experiment: How About an Apple?
What can you use to control the touch-sensitive Click Wheel? Here’s an abbreviated list of what we tested:
* Finger: Yes
* Orange: Yes
* Apple: Yes
* Plastic pen cap: No
* Silly Putty: No
* Paper clip: No
* Tip of Cold Heat soldering tool: No
* Prongs from iPod charger: No
The yesses are easily explainable — fruit and flesh can conduct electricity. The no’s, however, are a bit more mysterious. The pen cap and the Silly Putty are not conductors, end of story. But what about the tip of the soldering tool, the paper clip and the charger prongs? Those are conductors! To solve this riddle, we contacted an expert in the electronics field, who recommended the following action: Wrap your finger in aluminum foil and try to work the Scroll Wheel. Our expert was thinking “surface area.” This finger-wrapped-in-foil input worked perfectly.
Can it be that the surface area of the paper clip is not enough to trigger the conductive grid? To investigate this hypothesis, we tried to work the Scroll Wheel using the blunt end of a dinner knife (approx. 0.75 in x 0.5 in). It worked. We concluded that surface area matters.
But there’s another factor, too, because holding the dinner knife between two plastic pens and moving it around the Scroll Wheel doesn’t work. Same with the apple and the orange. You need to be touching the knife or the orange in order for the Scroll Wheel to detect it. The determining factor, then, is you — the human body is a very big conductor, providing a very big neutral area for a charge to jump to. The charge difference between your body and the Click Wheel’s electrodes provides the voltage — or electrical “pressure” — that activates the Click Wheel system.
iPod Hardware
The Thing About the Battery
iPod’s battery is completely built-in — you can’t just pop in a couple of new AA batteries when it stops charging. This built-in battery has been a headache both for iPod owners and for Apple.
Originally, the iPod battery was not only non-user-replaceable, but it was also very expensive to replace via Apple. When your battery died (sometimes within a year of buying the iPod), you had to send your iPod to Apple for a replacement, and the new battery cost $100. A lot of bad press and a class-action lawsuit later, Apple’s iPod battery-replacement program costs $59. The class-action suit was settled, and iPod owners listed in the suit were compensated with $50 vouchers and partial refunds for their $100 battery replacement.
Apple defends the use of a non-user-replaceable battery by explaining that the built-in battery allows for the ultra-slim form factor for which the iPod is known.
There are ways for you to replace the battery without sending your iPod to Apple.
iPod Features
iPod Features
In addition to the iTunes integration and autosync, the Click Wheel (more on this in the hardware section) and the slim form factor, some of iPod’s more notable features include:
Audio
The 160-GB iPod stores up to 40,000 songs (20,000 for the 80-GB model). The search function lets you type in keywords (song name, artist, album) [...]
How the iPod Works
iPod Myths
* If I use iPod as my digital-media player, I can only download music from the iTunes Store.
Not true. You can download music from other sites (as long as the site doesn’t use Windows Media DRM — iPod isn’t compatible with that encoding).
* If I use iPod as my digital-media player, I can only use the iTunes software as my jukebox.
Not true. While iPod is made to work with the iTunes software, there are other jukeboxes out there that you can use with your iPod.
* If I download MP3 or WAV files to my iPod, they’ll be converted into a proprietary audio format.
Not true. Downloading files to an iPod doesn’t change the format. iPod can play MP3, WAV, AAC, AIFF, Apple Lossless and Audible audio files.
